The CLEANTEC CTH 26 safely extracts hazardous dusts such as mould and asbestos, harmful wood preservatives, mineral fibre dust, lead, cadmium, nickel and zinc chromate. The vacuum cleaner with a 99.995% filter efficiency is the specialist when it comes to extracting carcinogenic and pathogenic dusts.
The large, 26 l container geometry of the CTH 26 provides maximum volume with small external dimensions and a high degree of flexibility – thanks to the swivelling castor wheels and large rear wheels.
The flat filter fully integrated in the suction head ensures the full volume is utilised: This means that the gross and net container volumes are virtually identical.
The extremely compact high-performance turbine provides the right suction power. A 3900 l/min volume flow means that nothing remains except clean air. Approved for dusts in dust class H.
- Safe transport
Accessories and tools in the Systainer and SORTAINER can be easily attached to the extractor via the SYS dock.
- Everything in perfect order
The power cable and suction hose are stored tidily and optimally protected in the permanently integrated hose holder and cable holder.
- High suction power
Extremely powerful, compact and light: The high-performance turbine provides considerably higher suction power and requires very little space.
- Double the safety
Double-layer safety filter bag as prescribed for dusts in class H and an additional disposable bag that surrounds the filter bag.
The locking brake ensures that the extractor will remain in place. The large wheels prevent the extractor from tipping over. The wheels can be turned, and the material that they are made from is resistant to wear. Because of the location of its centre of gravity, the extractor is easy to carry.
- Large capacity
The filter bag is free to unfold because of the flat filter and the smooth inner contours of the container. This allows the bag to be filled uniformly and a nearly 100% utilisation of the filter bag volume.
- Optional extension
Depending on requirements, the extractor can be equipped with additional modules, such as the compressed air module, an electrical outlet with continuous power, automatic electronic switch-on/shut-off switch, or an energy box module.
- For dusts in class H
The extractor is approved for dust class H. It is suitable for extracting harmful dusts with limit values < 0.1 mg/m³. The extractor features a large red label that indicates the dust class.
- Antistatic Function
Dust extractors and tools with antistatic function to prevent static buildup when working.
Speed control for adjusting to the working material.
- CLEANTEC Dust Extraction
Standard adapter (27/36/50 mm) for dust extraction to safeguard the operator and the environment.
Health protection flow sensor which monitors a minimum air speed of 20m/sec and issues a warning if the air speed falls below that value.
- Smooth Sleeve Hose
With a smooth exterior which allows it to slide over surfaces perfectly.
|Power Consumption||350 – 1,000 W|
|Maximum Airflow||3900.00 l/min|
|Maximum Vacuum||24000.00 Pa|
|Filter Surface Area||6318.00 cm²|
|Container/Filter Bag Capacity||26/24 L|
|Mains Cable||Rubber Insulated|
|Mains Cable Length (m)||7.50 m|
|Maximum Wattage of Connected Tool (W)||2400.00 W|
|Dimensions - L x W x H||630 x 365 x 540 mm|