Makita 18V Mobile Brushless 1/2" Impact Wrench DTW1002Z

Features:

  • Designed to suit the needs of structural steel tradesmen, heavy mechanics, riggers as well as anyone that needs to fasten material between 400 and 1,050 Nm
  • Develop a mobile brushless impact wrench that has 1,050 fastening torque, that is also extremely compact and lightweight
  • Rubber bumper -designed to protect the work piece from damage and insulate the heat from the motor
  • LED job light -twin LED job light with pre glow and afterglow functions
  • 3 stage impact selection -3 stage impact power can be selected depending on the material of the workpiece or bolt type.
  • Variable speed control -as well as having 3 stage impact selection user also has control over the speed on the trigger
  • BL Brushless Motor -provides more power and longer run times then normal brushed designs
  • Electric brake -driving shank quickly brakes upon release of the trigger, enabling the user to have more control over the tool
  • Rubber joint construction -suppresses the transmission of vibration to battery terminals. Minimising battery failures such as terminal breakage or poor contact
  • Sky hook -large hook 45mm wide for hanging on guard rails or scaffolding
Specifications:
Impacts per minute: ipm High 2,200
Med 2,000
Low 1,800
No load speed: rpm High 1,800
Med 1,000
Low 900
Tightening torque: Nm. High 1,000
Med 500
Low 300
Nut busting torque: Nm. 1,600

 

Makita 18V Brushless 1/2" Impact Wrench DTW300Z

 

Features:

  • Twin LED Job light with pre glow and after glow function to illuminate workpiece.
  • Variable speed control via trigger - impact selection speed can be controlled via the trigger providing the user with optimum control.
  • Electronic 4 stage impact selection - Max/Hard/Medium/Soft impact power can be selected to suit the application, simply by pushing a button.
  • Forward & Reverse Automatic Stop, with 6 modes for customized applications for greater control and convenience.
  • Trigger Switch with quick trigger mode engages immediate full speed.
  • Ergonomic Handle designed to maximise thrust to the bit as well as increasing control.
  • eXtreme Protection Technology enhanced protection from dust and moisture, enabling safe use in outdoor applications and harsh environments.
Specifications:
Voltage 18V
Max. capacities standard bolt M10 - M20
Max. capacities high tensile bolt M10 - M16
No load speed Max: 0-3,200 rpm
High: 0-2,600 rpm
Med: 0-1,800 rpm
Soft: 0-1,000 rpm
Impact rate Max: 0-4,000 ipm
High: 0-3,400 ipm
Med: 0-2,600 ipm
Soft: 1,800 ipm
Max. fastening torque Max: 330 Nm
Hard: 180 Nm
Medium: 130 Nm
Soft: 70 Nm
Nut busting torque 580 Nm
Drive shank 12.7 mm (1/2") Square
Overall length 144 mm
Weight 1.2 kg

 

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

 

Features:

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current, voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
  • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

 

Makita DC18RC Active 3 Li-Ion Charger

 

Features:

  • Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

Includes:
DTW1002 Impact Wrench,DTW300Z Impact Wrench,2 x 5.0Ah Batteries,DC18RC Charger,Carry Case
SKU DLX2371TJ
Barcode # 88381720830
Brand Makita
Shipping Weight 9.0000kg
Shipping Width 0.295m
Shipping Height 0.315m
Shipping Length 0.395m
Assembled Length 0.395m
Assembled Height 0.315m
Assembled Width 0.295m
Type tools
Voltage 18
Amp Hours 5.0
Battery Technology Lithium-Ion
Package Quantity 2 Piece
Battery Included 2x5.0ah
Motor Type Brushless
Power Source Cordless
Amp Hour 5
Warranty 5 Year Skin and 2 Year Battery & Charger

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review