Makita 18V Brushless Hammer Driver Drill DHP484Z

Features:

  • Brushless motor
  • Mechanical 2 speed gearing
  • Single sleeve keyless chuck
  • Twin LED job light
  • Variable speed control by trigger
  • XPT - eXtreme Protection Technology, enhances protection against dust and dripping water
Specifications:
Impacts Per Minute - Hi0-30,000 ipm
Impacts Per Minute - Lo0-7,500 ipm
Max Fastening Torque54 Nm
Net Weight1.8kg w/BL1860B
No Load Speed - Hi0-2,000 rpm
No Load Speed - Lo0-500 rpm
Overall Length182 mm
Capacity - Concrete13 mm
Capacity - Steel13 mm
Capacity - Wood38 mm

 

Makita 18V Brushless Impact Driver DTD153Z

Features:

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute0-3,600ipm
Max Fastening Torque170N.m
Net Weight1.5kg (BL1850B)
No Load Speed0-3,400rpm
Overall Length126mm
Capacity - Coarse Thread22-125 mm
Capacity - High Tensile BoltM5-M14
Capacity - Machine ScrewsM4-M8
Capacity - Standard BoltM5-M16

 

Makita 18V 24mm Brushless Rotary Hammer Drill DHR242Z

Features:

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure, comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering, Hammering only and Rotation only
  • Tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent, delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact
Specifications:
ManufacturerMakita
Model NoDHR242Z
Battery (Type)Lithium-Ion
Charging Time (min)22
Battery Quantity (3.0 Ah)0
Voltage (V)18
Single Impact Energy (J)2.4
Blows per minute (BPM)0 - 4700
No Load Speed (RPM)0 - 950
Net weight ( kg)3.3
Capacity in Concrete (mm)24
Capacity in Steel (mm)13
Capacity in Wood (mm)27

 

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current, voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
  • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time
Specifications:
Voltage18V
Dimensions LxWxH11 x 8 x 6.5 cm
Weight0.63 Kg

 

Makita 14.4-18v Dual Lithium Charger Fast Charger DC18RD

Features:

  • Fast charging - charges 2 x 3.0 Ah Lithium-Ion batteries at the same time in only 22 minutes
  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • LED charging display
  • Full charge sound alert
  • USB port provides 1.5 A output for charging smart phones, tablets, etc
Specifications:
Cell Capacity1.5 - 5.0 Ah
Charge Time15 mins (1.5 Ah), 22 mins (3.0 Ah), 36 mins (4.0 Ah), 45 mins (5.0 Ah)
Net Weight1.9 kg
Overall Length200 mm
Voltage18V

Includes:
DHP484Z Hammer Driver Drill, DTD153Z Impact Driver, DHR242Z 24mm Rotary Hammer, DC18RD Dual Port Rapid Charger, BL1850B 5.0Ah Battery
SKU DLX3137PT
Barcode # 0088381783910
Brand Makita
Shipping Weight 10.3500kg
Shipping Width 0.510m
Shipping Height 0.350m
Shipping Length 0.320m
Shipping Cubic 0.057120000m3
Type tools
Voltage 18
Amp hour 5.0

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review