Bonus Via Redemption until 31 March 2023

Features:

Brushless drill/screwdriver with maximum power for demanding applications
Metabo Quick System: quick change of bit retainer and bits, for flexible working
Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
Unique Metabo brushless motor for quick work progress and highest efficiency when drilling and screwdriving
Precision Stop: electronic torque control with increased precision for accurate and intricate working
Spindle with hexagonal recess for screwdriver bits for working without chuck
Collar (Ø 43 mm) for versatile use
Integrated working light to illuminate the contact area
Robust die cast aluminium gear housing for optimum heat dissipation and long service life
Handy belt hook and bit holder can be fixed either on the right or left side
Battery packs with capacity display for checking the charge status
Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.

Specifications:
Voltage	18 V
Maximum torque - soft	60 Nm
Pulse torque	65 Nm
Maximum torque, hard	120 Nm
Adjustable torque	1 - 20 Nm
Drill Ø steel	13 mm
Drill-Ø soft wood	65 mm
No-load speed	0 - 500 / 0 - 1850 rpm
Chuck capacity	1.5 - 13 mm
Weight (including battery pack)	2 kg
Drilling in metal	3.2 m/s²
Uncertainty of measurement K	1.5 m/s²
Sound pressure level	78 dB(A)
Sound power level (LwA)	89 dB(A)
Uncertainty of measurement K	3 dB(A)

Features:

LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
Patented "AIR COOLED" charging technology
Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
Processor-controlled charge and discharge management
Capacity display with almost no self-discharge
One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners

Features:

Monitored charging with microcontroller
Battery diagnosis
Charge time approximately 30 minutes at 1.5 Ah
"AIR COOLED" function
For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
"AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.