Bordo 35.00mm Chrome Alloy Screw (Chassis) Punch 7086-35.0

Features:

• 35mm Chrome Alloy Screw (Chassis) Punch
• A screw punch, also known as a chassis punch or a knockout punch, is used to punch a hole through sheet metal.
• First drill a pilot hole in the sheet metal the same size as the bolt in the punch.
• For sizes 13mm and under a Twist drill may be used.
• For larger sizes use a Bordo step drill.
• Place the die on to the bolt and then insert this assembly through the pilot hole.
• Wind the punch onto the bolt and tighten by hand until firm.
• Turn hex head of bolt with a socket, spanner or wrench until the punch is drawn completely through the sheet metal.