Enerdrive B-TEC 150amp / 24v LiFePO4 Battery Gen2
ePOWER B-TEC LiFeP04 24v 100Ah G2 Lithium Battery
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 150Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology.
By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information;
Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation.
It will protect the battery pack from over charge, over discharge, over temperature & short circuit.
The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
100Ah Lithium = 160Ah AGM
125Ah Lithium = 200Ah AGM
200Ah Lithium = 320Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The ePOWER B-TEC battery is perfect for camper trailers, 4WDs (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia.
Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With over 4000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please Note; The ePOWER B-TEC battery is capable to be paralleled to a second ePOWER B-TEC battery of the same size.
For maximum performance and lifespan of your ePOWER B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity.
Overall loads when paralleled should not exceed the current limits of a single batterys BMS.
The 150Ah battery is able to accept a maximum inverter capacity of 3500W only.
Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.
This product is not suitable to mount anywhere with a possibility of being exposed to the elements.
It is an electronic product designed for internal use ONLY.
Normal Specification | EPL-150BT-24V G2 |
---|---|
Nominal Voltage | 25.6V |
Nominal Capacity | 150Ah |
Cycle Life (DOD 80% under controlled conditions) | ‰¥ 2000 Cycles |
Standard Charge Specification (Lithium profile charger required) | |
Battery Charge Temperature | 0 Ì´ 45°C |
Normal Charge Voltage CV/CC* | 28.80 Ì´ 29.20V |
Standby (Float) Voltage | 27.00 Ì´ 27.60V |
Maximum Charge Current | 100A @ 25°C for 60mins |
Recommended Charge Current for Maximum Life | 30~75A |
Standard Discharge Specification | |
Battery Discharge Temperature | -20 Ì´ 60°C |
Battery Output Voltage Range | 22.00 Ì´ 29.20V |
Maximum Discharge Current | 150A @ 25°C ± 5°C for 30mins |
Pulse Discharge Current | 450A for 1.0s |
Discharge Cut-off Voltage | ‰¤22.40V |
Circuit Protection | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. |
Over-Charge Protection | |
Over-charge Protection Per Cell | 3.90V ± 0.03V |
Over-charge Release Per Cell | 3.60V ± 0.05V |
Over-charge Release Method | Discharge below release voltage |
Over-Discharge Protection | |
Over-discharge Protection Per Cell | 2.80V ± 0.05V |
Over-discharge Release Per Cell | 3.20V ± 0.05V |
Over-discharge Release Method | Apply Charge/Voltage ‰¥25.6V |
Over Current Protection | |
Discharge Over Current | 170A for 30s 400A for 3.5s |
Protection Reset Time | 30s Auto Release |
Over Current Release Method | Disconnect Load |
Over Temperature Protection | |
Battery Discharge Over Temperature | Protection to 65°C ± 5°C |
Release at 50°C ± 5°C | |
Battery Charge Over Temperature | Protection to 55°C ± 5°C |
Release at 45°C ± 5°C | |
Short Circuit Protection | Auto release after 5s |
Mechanical Characteristics | |
Dimensions | Length 521mm |
Width 280mm | |
Height 238mm | |
Weight | Approx 38.2 Kg |
Case Construction | Hi Impact ABS Plastic |
Storage Information | |
Temperature & Humidity Range | ‰¤ 30 days -20°C Ì´ 60°C, 5 Ì´ 75% RH |
‰¥ 90 days -10°C Ì´ 45°C, 5 Ì´ 75% RH | |
Self-discharge Rate | ‰¤ 3% Per Month |
(ENER-EPL-150BT-24V-G2)
SKU | ENER-EPL-150BT-24V-G2 |
Brand | Enerdrive |
Type | Automotive Electrical |
Be The First To Review This Product!
Help other tools.com users shop smarter by writing reviews for products you have purchased.