Front 2.5" Rear 2" Raise Suspension Lift Kits For Mitsubishi Triton L200 2005-ON

Product Overview :

Front Aluminium 32 mm Shock Spacer :

- These spacers are 32 mm thick and will lift the front of your car around 2.3"-2.5" inch ( 60-64 mm ).

- The spacers pictured are thicker for a bigger lift. The 32 mm spacers fit on top of your strut top using the original studs and nuts. No studs of nuts are supplies with this kit as they are not needed.

- The lift spacer is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm counds the amount of lift due to its angle and length.

Features :

- 100% Brand New

- Will provide approximately Front 2.3"-2.5" inch ( 60-64 mm ) and Rear 2" inch ( 45-48 mm ) of lift.

- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 Vehicles have.

Notes :

- Not included Installation Guide or Manual

- Professional Installation is Recommended

- Only Suitable For Model that Leaf Spring Installed above axle, Please make sure your vehicle Leaf Spring is installed above axle

- Fits For 4WD Model Only

- Subject to parts condition in order to get the ideal lifted height

Application ( Fits For Below Vehicles ) :

*** Please make sure it fit your car before purchase ***

*** Most of the images provided are for illustration purposes only and may not be the actual products.

Package Content :

- 2 x 32mm Shock Spacers

- 2 x Rear Block Adapter

- 4 x U-Bolts

Packing Size : 33 x 16 x 17 cm

Packing Weight : 6 kg

Actual Weight : 5.8 kg

L-MMA