Ingersoll Rand 1/2" 20V High Torque Impact Wrench with 2" Anvil W7252
- POWER: Powerful brushless motor and impact mechanism are finely tuned for best in class power-to-weight ratio.
- CONTROL: Includes the IQV Power Control System with 4 modes: Full Power, Half Power, Wrench Tight, and Hand Tight. From axle nuts to oil pans, flange bolts to pre-torque joints there's no need to switch tools.
- DURABLE: Patented steel reinforced frame and impact-and-chemical resistant housing protects the W7252 from every day abuse. The IQV brushless motor delivers more power and efficiency than a brushed motor, providing longer tool life.
- ACCESS: 8.1" short tip-to-tail design and 360° shadowless task light provides increased visibility and access.
- Tuned impact mechanism with 1500 ft-lb nut-busting torque and 1000 ft-lb of MAX torque
- Robust and durable all-metal drivetrain and hammer mechanism optimized for maximum power and efficiency
- Variable-speed switch (half and full power only) with electronic brake provides maximum control of the tool and increases safety-release trigger, drive stops spinning
- 4 dimmable settings on the shadowless 3600° LED light ring
- Tough composite housing and patented steel-reinforced frame protects against aggressive fluids, chemicals and repeated drops
- Ideally used for removing or fastening cradle bolts tire changing, fleet truck maintenance and in industrial and MRO settings
|Drive Type||Square, Socket Retainer Ring, Extended|
|Nut-busting Torque||2040 Nm|
|Forward Torque||1360 Nm|
|Hand Tight Forward Torque||5-14 Nm|
|Wrench Tight Forward Torque||47-149 Nm|
|Half Power Forward Torque||720 Nm|
|Max Reverse Torque||1360 Nm|
|Blows per minute||2450 bpm|
|Free Speed||1900 rpm|
|Sound Level||95.3 / 106.3 dB(A)|
|Vibration Level||17.2 m/s²|
|Weight (no battery)||2.8 kg|
Ingersoll Rand Universal Battery Charger 12 & 20V BC1121-AP4
The BC1121 lithium-ion universal charger gets all of the batteries in our IQV12 and IQV20 Series* lineup charged and ready to go whenever you are. Whether it's our 20V or 12V batteries, this innovative, multi-use battery charger will help you get back to work without missing a step. *For use with any of our IQV12 and IQV20 Lithium-Ion Batteries, BL2022, BL2010, BL2012 and BL1203.
- Compatibility - Charge any of your IQV12 and IQV20 Series batteries on the same universal charger. Whether its 12V or 20V, the BC1121 is going to make it easier and faster to have a freshly charged battery to get your work done now, not later.
- Productivity - An LED Fuel Gauge and audible alarm will let you know when your batteries are fully charged and ready to get back to work.
- Versatility - Not only can the BC1121 be mounted vertically or horizontally on a wall or work bench but the USB charge port on the side means you don't have to fight for an outlet with your tablet or smart phone. Let us take care of the clutter; you take care of what's next.
Ingersoll Rand 20V 5.0Ah Lithium-Ion Battery BL2022
The BL2022 IQV20 Series High Capacity x5.0 Battery delivers unmatched performance with 68% longer run time and the same size and weight as its predecessor. Fully compatible with all existing IQV20 tools and chargers and equipped with the same intelligent Battery Management System (BMS), we make sure you get more out of every volt.
- Performance - The BL2022 High Capacity 20V 5.0Ah battery delivers 68% longer run time than its predecessor (That's over 800 lug nuts when used with the 20v High Torque Impact Wrench!). And at the same size and weight as the previous model you can get more work done on a single charge.
- Durability - The intelligent Battery Management System (BMS) allows the battery to communicate with the tool and charger to offer triple battery protection, prevent over loading, over charging and over discharging for longer tool and battery life.
- Versatility - The BL2022 5.0Ah battery is compatible with all IQV20 series power tools allowing you to swap batteries and tools to get the job done right every time