Makita 40V Max Brushless 28mm SDS Plus Rotary Hammer 4.0ah Set HR007GM201

Features:

• Standard SDS Chuck the HR007G is equip with a standard chuck compatible with SDS Plus bits.
• Improved Tool Balance - improved design optimises the tool's center of gravity locating it as close to the handle grip as possible. This provides ideal weight distribution for more control and less fatigue even in overhead or horizontal drilling/chipping applications.
• Anti Vibration Technology (AVT) - extremely low vibration is achieved by 4 active vibration absorbing mechanisms. A counterweight, vibration absorbing rear handle, anti vibration side grip and rubber joint construction.
• Auto Start Wireless System (AWS)* - compatible with AWS the rotary hammer can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
• Variable Speed Trigger & Dial - impacting power can be adjusted by switch trigger and speed dial according to applications.
• Active Feedback Sensing Technology (AFT) - sensors shut down the tool in the event of a kickback providing user protection. If the bit rotation is suddenly forced to stop such as the bit jamming the motor automatically shuts down.
• High Power Output the high power 40V Max XGT Li Ion battery allows for continuous operation in heavy duty applications. Such as drilling with a 65 mm diamond core bit

Makita 40V Max 4.0Ah Battery (BL4040) 191B26-6

Features:

• Built tough - High durability features specifically designed for XGT
• Shock absorbing structure
• High Rigidity Battery Rails - Durable slide in battery rail holds the battery and tools firmly to withstand high powered products
• Terminal shot-circuit prevention structure - The protection wall is positioned between terminals to protect them from water and dust
• Triple-layer Waterproof Structure - Prevents cell failure due to water and dust

Makita 40V Max Rapid Charger (DC40RA) 191E09-4

Features:

• Optimum Charging System - Rapid optimum charge is achieved by feeding real time data of the battery being charged with the charging control system. Data such as battery condition and cell temperature are communicated to optimise the charge.
• Dual cooling fans - One for the battery and one for the charging circuit. This enable the charger to fully charge all batteries in the same charging time without slowing down due to a heat increase.
• New charging status indicator light - The enlarged and raised LED light provides clearer indication of charging status.
• Compatible with LXT Li-Ion Batteries - ADP10 was developed for use with the DC40RA to rapid charge 18V batteries faster then ever before.