Projecta Ic800-24 Battery Charger 24 Volt 8 Amp 7 Stage Agm Deep Cycle New 24V
PROJECTA IC800-24 Automatic 24V 7A 7 Stage Battery Charger
, ,, ,
,,
Manufacturer Warranty ,,The manufacturer supplies a 2 year Manufacturer Warranty nationwide. ,, |
FEATURES
- ADJUSTABLE CHARGE RATE
- The charger’s output can be adjusted to suit the size of the battery for optimum
- charging
- REMOTE CONTROL DISPLAY
- Control and monitor the charger’s performance from a remote control display, allowing
- the charger to be flush or surface mounted out of the way and out of sight. The battery
- charger and remote are synchronised for operation either locally or by remote.
- TEMPERATURE COMPENSATION*
- The temperature sensor monitors the battery temperature and adjusts (compensates)
- the charger’s output to prevent overcharging. This is ideal for batteries used in warmer
- climates or environments.
- SWITCHMODE TECHNOLOGY
- LCD SCREEN & LED INDICATORS
- POLARITY PROTECTION
- OVER TEMPERATURE PROTECTION
Offering all the features of its 7A 12v volt counterpart, THIS 24 VOLT 8 Amp Intelli-Charge model is a sophisticated and compact charger.
With multi-chemistry settings for charging Wet, Calcium, AGM or Gel batteries, it is ideally suited for starting, marine and deep cycle batteries. The power supply mode retains vehicle computer settings when changing a battery and it can also run 12V appliances, making it a very versatile piece of equipment.
The charger is shock and dust-proof for the toughest of environments and is aimed at batteries used with small passenger vehicles through to heavy-duty 4WDs.
, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, ,, ,, , , ,, , , ,, ,, ,, ,, ,, , , ,, ,, ,, ,, ,, , , ,, ,, ,, ,, ,, , , ,, ,, ,, ,, ,, ,
SPECIFICATIONS | ||||
Type | 7 stage | |||
Input | 240VAC, 50Hz, 216W | |||
Output | 8A at 24V | |||
Minimum start voltage | 4.5V | |||
Back drain | 1mA Voltage Battery size | |||
Approvals | Electrical Safety, EMC | |||
Charge voltage | 28.2V (GEL) | |||
28.8V (AGM) | ||||
29.4V (WET) | ||||
29.4V (Calcium) | ||||
LED CHARGE INDICATION | ||||
Red light on | Power on | |||
Blue light on | Charging | |||
Green light on | Fully charged and maintaining, no need to turn the charger off | |||
DESULPHATION ,,,The Desulphation stage is designed to break down sulphation occurring in batteries ,,,that have been left flat for extended periods of time, returning them back to full charge. ,,,Sulphation occurs when lead-sulphate hardens and clogs up the battery cells. ,,,SOFT START ,,,This is a preliminary charge process that gently introduces power to the battery ,,,protecting the battery and increasing battery life. ,,,BULK (CONSTANT CURRENT) ,,,The Bulk stage reduces charging time by charging the battery at the maximum ,,,rate (constant current) to a set voltage, at which point the battery is approximately ,,,80% charged. ,,,ABSORPTION (CONSTANT VOLTAGE) ,,,The absorption stage charges the battery to 100% by adjusting the charge rate allowing ,,,the battery to absorb more power. ,,,EQUALISATION (CALCIUM MODE ONLY) ,,,Designed especially for calcium batteries, this stage returns calcium batteries to full ,,,service by removing acid stratification of the electrolyte. ,,,ANALYSIS ,,,The analysis mode tests the battery to ensure that it has taken the charge; if the ,,,battery passes the test the charger will proceed to the float stage, but if the battery ,,,fails the test, the charger will apply a recondition charge to try to return the battery ,,,to full charge. ,,,RECONDITION ,,,If after charging, the battery is unable to hold the charge the battery reconditioning ,,,function is initiated automatically. This is most likely to take place on batteries that ,,,have been deeply discharged, prior to charging. The Recondition mode will then run ,,,for 4 hours and at the end will retest the battery. The Intelli-Charge battery charger ,,,will perform the recondition charge up to 3 times before switching the charging cycle ,,,to Float with an error indication. ,,,FLOAT ,,,The Float stage maintains the battery at 100% charge without overcharging or ,,,damaging the battery. This means the charger can be left connected to the battery indefinitely. |
||||
BATTERY CHARGE TIMES | ||||
Voltage | Battery size | Charge time | ||
Automotive | 12V | 800-1000CCA | 6-12 hrs | |
Marine | 12V | 110-1300MCA | 8-15 hrs | |
Deep cycle | 12V | 14-160Ah | 6-20 hrs |
TYPES OF BATTERIES COMPATIBLE
Most types of lead acid batteries inc Gel , AGM , Wet , Calcium
DIMENSIONS
190mm x 81mm x 168mm , Weight = 1.8kg
(IC800-24)
SKU | IC800-24 |
Model # | IC800-24 |
Barcode # | 9315219988805 |
Brand | Projecta |
Shipping Weight | 2.8000kg |
Unit Of Measure | ea |
Type | Charger |
Be The First To Review This Product!
Help other tools.com users shop smarter by writing reviews for products you have purchased.