Groz AMV/SP/150 150mm Angular Machine Vice GZ-35004

Picture shown is for illustration purpose only. Size may vary. Please refer to description.

Features:

• Angular adjustment is achieved via the angular slide that can be set to any desired angle 45° on either side. Additionally the fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.
• These vices are manufactured from close grained hi-tensile seasoned cast iron with fully hardened and ground tool steel jaws.
• Ergonomically designed all steel handle allows for stress free operation. Assembled on the spindle crank with a spring loaded mechanism providing positive grip.
• Use of hi-tensile grade 10.8 fasteners provides strength and rigidity to these vices.
• Relief in clamp seat ensures complete surface contact as against a line contact between the "Hold Down" clamp and movable slide, thereby providing firm locking at any desired angle.
• A milled slot in the vice base helps in accurate location of the vice on the machine table using rectangular locating nuts.
• "Hold Down" slots provide secure clamping of the vice on the machine table.
• Fully hardened (55 ± 3 HRC) and ground tool steel jaws with parallelism within 0.0012" (30 microns).
• Relief in the clamp seat ensures complete surface contact providing firm locking at any desired angle.
• Fully graduated 0-90° angular slide on both sides provides easy readability.
• Accurately ground bearing surface. Flatness within 0.0012" (30 microns).