Tommy Tucker Saw Bench Includes 2 x Extensions

Tommy Tucker Innovation
Simple and Quick to Assemble
Fully adjustable and extremely stable

2 Extensions Included

The robust aluminium stop is adjustable up to 2.95m from the saw blade, when using extensions.

An extra fence can be obtained in any position on top of the bench by clamping an additional Stop upside down under the bench top. The tongue will protrude the bench top by 30mm.

A 2.2m simple self-locking extension is optional and can be fitted to either end of the bench. The extensions are folding and are slotted for precise height adjustment.

When 2 extensions are fitted the total overall Length of the bench top is 6m.

DROP-SAW BENCH - INSTRUCTIONS
1. Fold out both legs of the Saw Bench into the fully open position.
2. Saw Bench must be positioned on a flat level surface.
3. Fit Platform.
4. Place the Drop-Saw on top of the aluminium Platform.
5. Adjust the height of the Platform by turning the four Nylock. 5 nuts provided so as the saw table is level with the channel top.
6. Align the fence of the saw with the outer edge of the 150mm wide saw bench channel top by using a straight edge.
7. Drill at least 2 x 10mm holes through the base of the Drop-Saw and through the aluminium Platform.
8. To bolt the Drop-Saw down, use at least 2 x 10mm hex bolts with Nylock nuts and tighten.
9. To secure the Platform to the Bench use one wing nut on each of the four height adjusting rods.
10. To fit extension, lift to 45o.