Unimig Razor Cut 40 Air Plasma Cutter U14001K

Calculate Shipping

The RAZOR CUT 40 AIR is the perfect plasma cutter for the professional who wants a powerful plasma cutter with a built-in air compressor. Fitted with a 15 AMP plug, this machine is made for the workshop and worksite. The RAZOR CUT 40 AIR boasts some serious cutting power with 10mm clean-cut and 12mm severance on the built-in air compressor, and 16mm clean-cut and 20mm severance on an external compressor.

Features:

BUILT-IN AIR COMPRESSOR - The RAZOR CUT 40 AIR comes with a built-in air compressor, giving you more flexibility with a plasma cutter than ever before. Connect an external air compressor for even greater cutting power.
PERFORATED CUTTING MODE - Cuts both solid material and perforated materials with ease.
PILOT ARC START - Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

Specifications:
Primary Input Voltage	240V Single Phase
Supply Plug	15 AMP
Rated Input Power (kVA)	7.2
Ieff (A)	15
Rated Output	96V
No Load Voltage (V)	210
Protection Class	IP21
Insulation Class	H
Minimum Generator (kVA)	10.0
DINSE Connector	10/25
Standard	AS/NZ60974-1
Warranty (Years)	3
Size & Weight
Dimensions (mm)	610x215x420mm
Weight (kg)	18kg
Plasma Cut Specifications
Plasma Cut Current Range	20-40A
Plasma Cut Duty Cycle @ 40°C	25% @ 40A / 60% @ 26A / 100% @ 20A
Mild Steel Cut Thickness	12mm (Internal) / 16mm (External)
Mild Steel Severance Thickness	14mm (Internal) / 18mm (External)
Aluminium Cut Thickness	6mm (Internal) / 8mm (External)
Aluminium Severance Thickness	8mm (Internal) / 10mm (External)
Stainless Steel Cut Thickness	6mm (Internal) / 8mm (External)
Stainless Steel Severance Thickness	8mm (Internal) / 10mm (External)
Air Flow Draw Off (L/min)	120
Air Flow Pressure (Bar)	5.17 (75 psi)
Plasma Arc Start	Pilot Arc