C.Scope MXL4 Precision Locator and MXT4 Transmitter Combo Kit MXL4D-MXT4D

Calculate Shipping

The C. Scope MXL4 Locator is designed for use alongside an MXT4 Transmitter. It enables a far more flexible approach to pipe and cable location enabling the operator to accurately detect, pinpoint, trace and identify the widest range of pipes and cables.

C.Scope MXL4 Precision Locator

The MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities. Two versions of the MXL4 are available; the MXL4-D which has full data logging capability, and the MXL4-DBG which has full data logging capability, Bluetooth connectivity and GPS. Innovative new features have been introduced enabling the MXL4 Locator and MXT4 Transmitter to provide high-end precision performance and a far more flexible approach to pipe and cable location.

Features:

Power Mode
Radio Mode
Transmitter Mode:
- Simultaneous 33+131kHz signal detection for utility avoidance
- 33kHz signal detection for all purpose tracing and utility avoidance
- 131kHz for optimum detection of short length, small diameter or unearthed cables
- 8kHz signal detection for tracing over longer distances
- Ultra-low 512Hz signal detection for specialist tracing
- Ultra-low 640Hz signal detection for specialist tracing
All Scan Mode
Accurate Depth Indication
Signal Current Measurement
Overload Protection
Alarm Zone
Peak Hold
Dynamic Swing Sensor
Automatic Daily Self-Test
Data Logging of all Locator activity
Data Transfer by USB (Bluetooth option)
In-Build GPS position logging (optional)
Connectivity to Survey level GPS products (option)
High resolution Liquid Crystal Display
No periodic Calibration required
Product Validation Certificate available

Specifications:
Transmitter Mode Frequencies	Simultaneous 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz; 8,192Hz; 640 and 512Hz
Locate Accuracy	better than 10% of depth
Depth Accuracy	±5% @ 1m
Line Depth Measurement Range	0.1 m to 9.99 m
Line Depth Resolution	0.1 m
Sonde Depth Measurement Range	0.1 m to 9.99 m
Sonde Depth Resolution	0.1 m
Current Measurement	0.01 mA to 100 mA
IP Rating	IP65
Dimensions	720 x 280 x 65 mm
Weight (including batteries)	2.65 kg

SGV4 Signal Generator

The MXT4 offers three alternative ways to apply a Signal Generator signal:
Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.
If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.
Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.

Features:

One Watt 4-level adjustable Power Output
Six Signal Outputs
- Simultaneous 33+131kHz
- 512Hz Signal
- 640Hz Signal
- 8kHz Signal
- 33kHz Signal
- 131kHz
Pulsed or Continuous Output Signal
Three Signal Application Techniques: Direct Connection / Wraparound / Induction
Automatic Daily Self-Test
Data Logging of all Transmitter activity
Data Transfer by USB
High resolution Liquid Crystal Display
No periodic Calibration required
Product Validation Certificate available
In-built Accessory Tray

Specifications:
Output: Induced	131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz and 8,192Hz
Output: Connected	131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz; 8,192Hz; 640 and 512Hz
Output: Carrier Pulse Frequency	7.5Hz (pulsed mode)
Maximum Output Voltage (open circuit)	30V rms
Maximum Output Current (short circuit)	65mA rms
Maximum Power	1W into 400? load
Dimensions	360 x 180 x 230 mm
IP Rating	IP65
Weight	3.4 kg