Festool 18V 6 Piece Joiners Starter Kit Ultimate System F28728
SKU: F28728
Reasons to use Toolfleet Apply Now
Improve Cashflow
Improve your cash flow by paying off your fleet of tools over 36 months.
Theft Protection
Enjoy peace of mind with theft protection by Toolguard for the duration of your fleet plan.
Member Rewards
Get exclusive discounts on our entire workwear range, including brands like Steel Blue, Bisley and more.
Reasons to use ToolpayApply Now
Improve Cashflow
Improve your cash flow by defering payments for up to 60 days.
Theft Protection
Enjoy peace of mind with one year of theft protection by Toolguard.
Buyer Portal
Users can invite team members, track spending, request credit limit increases and more.
Festool 18V 216mm Slide Compound Mitre Saw KSC 60 KAPEX 576847
Mobility, versatility and best results - perfectly combined.
The new KAPEX KSC 60 dispenses with everything not needed for the job – such as every unnecessary gram of weight. With impressive features such as ergonomically positioned carrying handles, cord holder and transport safety device and an extremely compact design thanks to flush-mounted guide rods, this device makes no compromises in terms of precision and versatility – with a mitre angle on both sides of up to 60 degrees and an inclination angle on both sides of up to 46 or 47 degrees.
The Festool twin-column guide with two bearings ensures that the saw blade is guided reliably and smoothly. A range of other clever details such as the LED spotlight, the pull-out extension table, the additional groove function and the bevel help to make the KAPEX KSC 60 a perfect combination of mobility, versatility and optimum results.
Features:
- Compact and lightweight, with ergonomic handles and cord holder
- LED spotlight to show cutting lines precisely (included in the set or available as an accessory)
- Bevel for producing interior and exterior angles
- Inclination angle of up to 47°/46° on each side and mitre angle of up to 60° on each side
- Limitless mobility - With ergonomically positioned carry handles and a practical immobiliser for transport. Also extremely compact due to the flush-mounted guide rods, and light in weight
- Maximum power, almost endless stamina - You can't tell the difference – the combination of the brushless EC-TEC motor and dual battery system (2 x 18V) gives the KSC 60 the same impressive power as a corded tool, but with full mobility at the same time.
- Maximum precision - Dual ball-bearing mounting: Festool's twin sliding rails ensure smooth and reliable guidance of the saw blade for maximum precision – with no wobbling or juddering.
- Maximum range of application - Thanks to the mitre angle of up to 60 degrees on both sides. The angle is set using the latch on the base, with quick selection of preset mitre angles using detents.
- Hugely versatile - Thanks to a bevel angle on both sides of up to 47 or 46 degrees. The angle is set using the easy-to-access and easy-to-operate clamp together with the high precision angle scale.
- Optimum view of the scribe mark - The LED transfers the sharply defined shadow of the saw blade onto the material, for a precise display of the cut line.
- Also for long workpieces The variable-width, pull-out extension table provides secure and precise support even for long workpieces.
- Trenching function for even greater versatility - With the cut depth limiter, you can also cut trenches quickly and precisely.
- Saves time and reduces errors - The SM-KS smart bevel makes it easy to quickly measure internal and external angles and then transfer the measurement accurately to the saw.
- Additional working surface - The additional feet raise the work table of the KSC 60 exactly to the height of a Systainer SYS 3 M 112 or SYSTAINER SYS 1. This means the latter can also be used as a workbench for reliable support of long workpieces.
- Healthier - For less dusty work even without a dust extractor, the dust catcher catches the dust directly where it is produced.
- For left and right handers - Switch and grip are positioned centrally – for equally comfortable operation with the right hand or the left.
- Antistatic Function - Dust extractors and tools with antistatic function to prevent static buildup when working.
Specifications: | |
---|---|
Voltage | 18 V |
Cutting Depth at 45°/90° | 215 x 60 mm |
Cutting Depth at 45°/45° Left | 215 x 40 mm |
Cutting Depth at 45°/45° Right | 215 x 20 mm |
Cutting Depth 90°/90° | 305 x 60 mm |
Mitre Angle | 60°/60° |
Dimensions W x D x H | 661 x 475 x 430 mm |
Inclination Angle | 47°/46° |
No Load Speed | 1300 - 3500 rpm |
Saw Blade Diameter | 216 mm |
Dust Extraction Connection Diameter | 27/36 mm |
Motor Type | Brushless |
Weight - with 1 or 2 x 18V (Battery Pack) | 17.1/18.5 kg |
Festool KAPEX 60 Saw Mobile Trolley (UG-KS 60) 200129
Features:
- Providing a clever compact system that can be set up and packed up in seconds, includes ergonomic handles, cable winding, transport lock and folding stand make moving from job to job fuss free.
- Compatible Tools: KS 60 KAPEX Slide Compound Mitre Saw
Specifications: | |
---|---|
Work height | 900mm |
Weight | 13kg |
Festool Right & Left Trimming Attachment for KAPEX 60 Trolley (KA-UG-KS 60-R/L ) 201909
Features:
- For KS 60 - use together with the Festool KS 60 UG Kapex mobile trolley.
- Consists of KA UG L and KA UG R, measurement scale, adjustable stop, telescopic slide out scale, fold out leg length ext arm without telescopic 1480mm, max measurement 2400mm.
- Compatible Tools: KS 60 KAPEX Slide Compound Mitre Saw,KS 120 KAPEX Slide Compound Mitre Saw,KS 88 Slide Compound Mitre Saw
Specifications: | |
---|---|
Length, ext.arm (w/out teles.) | 1480 mm |
Max. meas. length | 2400 mm |
Packaging | In a Box |
Festool TSC 55K 18V 160mm Plunge Saw 5.2ah Set with Rail 577282
The kickback is the most common cause of serious injuries when using a plunge-cut saw. Our unique kickback stop stops the saw blade in the blink of an eye, not only protecting your workpiece but also minimising the risk of injury to your hands. Our new generation of saw blades and the concentrated torque of our cordless plunge-cut saws allows users to make powerful, precise cuts at up to twice the speed with an extended battery range, for maximum cutting performance and perfect cutting quality. Variable speed control and angle settings allow for delicate working adapted to the material and precision undercuts. The sawing system is rounded off with clever system accessories, such as guide rails, an angle stop, splinter guard and saw table.
Features:
- Improved safety thanks to unique kickback stop - The integrated kickback stop reduces the risk of injury from kickback when sawing or plunging the tool into the workpiece. It can be manually deactivated, for example when working without a guide rail on uneven material. The advantage: The kickback stop is automatically reactivated the next time the saw is switched on.
- Exceptional torque - The concentrated torque of our plunge-cut saw enables work progress at up to twice the speed with an increased saw blade service life. Our new generation of saw blades impresses users when combined with maximum cutting performance and perfect cutting quality.
- Exact cuts, even at an angle - The TSC 55 enables precise work. The cutting edge from 90° to 47° remains unchanged even when the saw swivels. Transparent sliding viewing window and the additional markings for the starting and end point provide a good view of the saw blade.
- Angle setting from -1° to 47° - The angles 0° and 45° can be selected directly using the locking positions. Undercuts are also possible with the extended adjustment option from -1° to 47°.
- Perfect cuts reduce the need for reworking - With the clip-on splinter guard in combination with the guide rail, it is even possible to saw on both sides without virtually any splinters.
- Maximum flexibility - The slimline housing allows users to make cuts up to the edges and in close proximity to the wall (12 mm).
- Precise and healthy working with a system - Combined with our guide rails, a wide range of saw blades, the adapted extraction system, saw table, angle stop and splinter guard, we offer a top-class sawing system.
- FastFix saw blade changing system - Always adapted to the working material. The FastFix spindle stop makes it extremely easy to change the saw blade. The correct saw blade is fitted in just a few steps and the sawing speed is adapted to the material.
- Low-dust mobile working - We have two ways of protecting health: Whether with a dust collection bag or an extractor with Bluetooth automatic switch-on - the Festool extraction system ensures virtually dust-free work.
- Greater power and performance - The lithium-ion batteries and the brushless EC-TEC motor with maximum efficiency provide maximum cutting performance and exceptional durability.
- CLEANTEC Connection System - Integrated bayonet fitting as the connecting element between the extractor and the tool.
- EC-TEC Brushless Motor - The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
- FastFix - Makes changing accessories or consumables for routing, sawing, planing, sanding, drilling and screwdriving tools easier.
- Guide System - Patented guide system for safe guidance of saws and routers.
- Kickback Stop - Kickback stop helps to reduce the risk of injury from kickback when sawing or plunging the tool into the workpiece
- Lithium-ion battery - Fitted with high-performance lithium ion battery pack.
- MMC Electronics - Multi Material Control power electronics with adjustable constant speed and temperature monitoring for work with all types of materials.
- Splinterguard - Patented splinterguard for splinter free cuts on both sides when sawing.
- Quick Acting Brake - For safe work when planing, sawing and routing.
- Bluetooth Interface - Use of mobile devices via Bluetooth standard.
- AIRSTREAM Battery - AIRSTREAM technology cools batteries for faster use and significantly increased charging capacity.
Specifications: | |
---|---|
Voltage | 18 V / 36 V |
No Load Speed | 2,650 rpm - 3,800 rpm / 5,200 rpm |
Saw Blade Diameter | 160 mm |
Cutting Depth | 0 - 55 mm |
Cutting Depth at 45° | 43 mm |
Dust Extraction Connection Diameter | 27 mm / 36 mm |
Bevel Angle Range | -1° to 47° |
Motor Type | Brushless |
Weight (With battery) | 4.6 kg |
Festool 18V CTMC MIDI 15l M Class Mobile Dust Extractor 577067
Comparable power to your corded version thanks to the 36 V turbine with 2 x 18 V battery packs (4.0/5.2/8.0 Ah). This makes it ideal for mobile sawing, sanding or drilling.
Ideal combination with Festool cordless tools. Convenient and fast: The extractor switches on automatically via the Bluetooth® battery pack.
Switching on the extractor via the remote control directly on the suction hose saves you a trip to the extractor. Ideal for occasional cleaning tasks.|Adjustable suction power in three levels. The appropriate level can be selected depending on the application, which increases the battery runtime.
With four battery packs and the TCL 6 DUO rapid charger, work can be done in most cordless applications without interruptions.|Smooth and effortless. The suction hose will impress you with flexible handling and a long service life. It glides over every edge and possesses conical geometry for increased suction power.
The large internal hose holder makes it easy to stow the suction hose, ensuring safe and clean transport.
With the manual main filter and filter bag dedusting, the suction power can be quickly and easily recovered when the filter or filter bag is clogged. This significantly increases the fill level.
Quick, easy and tool-free. The attachable accessory case means that you have everything to hand. It offers space for additional battery packs and cleaning accessories (case available as an accessory).
The cordless dust extractor is approved for harmful dust particles in dust class M with limit values ≥0.1 mg/m³. It is suitable for the extraction of wood and mineral dust.
The flat storage area on top of the hose holder can be used as a seat or as a shelf for working materials. Thanks to T-LOC, the extractor can be coupled with Systainers.
Features:
- Practical remote control - Switching on the dust extractor via the remote control right on the suction hose saves you going to the extractor. Ideal for cleaning between work steps.
- Working without interruptions - With four battery packs and the TCL 6 DUO rapid charger, you can work uninterrupted on most cordless applications.
- Suction power adjustment - Suction power adjustable in three levels. You can choose the right level for your application, to extend the running time of the battery.
- Smooth suction hose - Smooth, elastic and extremely tough. The suction hose boasts impressive flexibility, gliding over any edge.
- Antistatic Function - Dust extractors and tools with antistatic function to prevent static buildup when working.
- Electronic - Speed control for adjusting to the working material.
- Bluetooth Interface - Use of mobile devices via Bluetooth standard.
- CLEANTEC Connection System - Integrated bayonet fitting as the connecting element between the extractor and the tool.
- Lithium-ion battery - Fitted with high-performance lithium ion battery pack.
- Smooth Sleeve Hose - With a smooth exterior which allows it to slide over surfaces perfectly
Specifications: | |
---|---|
Voltage | 18 V |
Maximum Airflow | 3100 lpm |
Maximum Vacuum | 19,000 Pa |
Filter Surface Area | 3,369 cm² |
Container/Filter Bag Capacity | 15/12.5 : |
Auto Clean Function | Yes |
Dust Approval Rating | Dust Class M - medium risk dust such as mineral and wood dust |
Technology | Bluetooth |
Run time | 2 x 4.0Ah - 12-22 mins 2 x 5.2Ah - 16-30 mins 2 x 8.0Ah - 24-45 mins |
Dimensions - L x W x H | 550 x 320 x 495 mm |
Weight - with 1 or 2 x 18V (Battery Pack) | 17.1/18.5 kg |
Festool TID/TPC 18V 2 Piece Impact Driver / Hammer Drill 4.0/5.2Ah Set 576999
Festool 18V Brushless Impact Driver Basic TID 18-Basic 576481
This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance. In addition to this, the TID 18 with 1/4" tool holder turns the screw without straining your wrist - thanks to the tangential hammer mechanism with no strength sapping back torque. The machine weight of just 960 grams also allows you to work for longer without becoming tired.
Features:
- Robust: Long-lasting quality components, also fully covered thanks to the comprehensive support provided by Festool Service
- Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, latest generation EC-TEC motor with three speed levels, 180 Nm torque and additional T-mode specifically for self-tapping screws
- Safe: kickback-free tangential hammer mechanism protects your wrist
- Ergonomic: compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas
- Flexible battery system: For applications with high power needs, the 4.0 Ah Li-HighPower Compact battery pack provides the ideal powerful, compact and lightweight solution. For even less weight, opt for the 3.1 Ah Compact battery pack for light screw joints
- Convenient: tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, belt clip for attachment on both sides
- Mobile: packed in a Systainer?, the TID 18 can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site
Specifications: | |
---|---|
Voltage | 18 V |
No Load Speed 1st Gear | 0 - 1200 rpm |
No Load Speed 2nd Gear | 0 - 2000 rpm |
No Load Speed 3rd Gear | 0 - 3200 rpm |
Motor Type | Brushless |
Gears | 3 + T-Modus |
Maximum Torque Wood | 180 Nm |
Maximum Impact Rate | 4 500 imp |
Maximum Screw Diameter | 8 x 220 mm |
Weight | 1.3 kg |
Festool 18V 4 Speed TPC Brushless Hammer Drill 577285
Powerful. Versatile. With four gears for every application and the best switching concept you have ever operated. Whether you are working on wood, metal or masonry, the TPC QUADRIVE is extremely durable and thanks to its brushless EC-TEC motor, has extreme resilience and endurance. The axial impact feature is easily switched on for work with masonry. Up to 75Nm of power drives screws and drills large diameters easily, while electronic kickback stop minimises wrist injury if the tool suddenly jams. The large number of attachments, combined with perfectly matched accessories, make the QUADRIVE an unrivalled drill for a wide range of possible uses.
Features:
- Greater safety when working - The electronic kickback stop prevents your wrist from twisting dangerously if the drill suddenly becomes caught or jammed, therefore ensuring improved safety when working.
- The QUADRIVE - four gears, with the right one for every application - 1st gear: Demanding tightening of screws up to 10 mm. 2nd gear: Quick screwdriving up to 8 x 300 mm in size. 3rd gear: Powerful drilling with auger bits of up to 20 mm. 4th gear: Quick drilling with medium and small drill bits up to 35 mm, for example Forstner drill bits.
- Optimised gear switching - Fast, safe, direct! Switching in any direction - from any gear straight to any other, without intermediate stages. Fixed stops ensure clear engaging. Fast downshifting possible as required.
- Increased power in 2nd gear - 40% more torque compared to the previous model for full traction with 8 mm screws.
- QUADRIVE: Unique system width and perfect system compatibility - Thanks to the smart FastFix interface, you can use all of the 18 V attachments from the Festool range and therefore benefit from the system advantages. No other drill has such varied possible uses!
- CENTROTEC tool chuck - for even more speed at construction sites - For instantly changing between drilling, countersinking and screwdriving: The CENTROTEC tool chuck, which has proven itself since 2001, is a chuck and bit holder in one. Even though it is half the size and weighs 80% less than a standard chuck: A real Festool invention with the usual Festool quality.
- Latest generation of brushless EC-TEC motors - The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery. The latest generation of EC-TEC motors provides more torque and speed under load.
- Practical attachments with quick angle adjustment - Very quick angle adjustment simply by rotating the green ring. The attachment no longer needs to be released from the machine. Even the eccentric adapter for screwdriving close to edges is equipped with quick angle adjustment.
- Convenient for day-to-day use - Optimised torque adjustment to prevent accidental adjustment. A robust belt clip that can be attached on both sides and a bit holder for secure and magnetic bit storage at the side of the drill.
- Perfect ergonomics - both compact and powerful - Thanks to its smaller circumference, the optimised handle ensures improved ergonomics and easier handling.
- Torque Shut Off - Intelligent technology ensures the optimum screwdriving force for every material.
- EC-TEC Brushless Motor - The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
- Electronic Monitoring - Electronic monitoring of the coil temperature protects against damage to the motor.
- Kickback Stop - Kickback stop helps to reduce the risk of injury from kickback when sawing or plunging the tool into the workpiece
- Electronic - Speed control for adjusting to the working material.
Specifications: | |
---|---|
Voltage | 18 V |
Drilling Diameter Wood | 70 mm |
Drilling Diameter Steel | 13 mm |
No Load Speed 1st Gear | 0 - 500 rpm |
No Load Speed 2nd Gear | 0 - 800 rpm |
No Load Speed 3rd Gear | 0 - 2350 rpm |
No Load Speed 4th Gear | 0 - 3600 rpm |
Gears | 4 |
Torque Adjustment 1st Gear | 2 - 20 Nm |
Torque Adjustment 2nd Gear | 2 - 20 Nm |
Maximum Torque Wood | 50 Nm |
Maximum Torque Steel | 75 Nm |
Chuck Range | 1.5 - 13 mm |
Drilling Diameter Brick | 10 mm |
Maximum Impact Rate | 57,600 imp |
Weight | FastFix |
Festool 18V Li-Ion 4.0 Ah Airstream Bluetooth High Power Battery Pack BP 18 Li 4.0 HPC-ASI 205034
Features:
- Effortless work: At just 600 g, it is 20% lighter and 50% more compact than a 5.2 Ah battery pack
- Full power: Thanks to the Li-High Power cell technology, it is powerful enough for every application
- Extremely durable: The high-current-resistant cells ensure durability
- For stress-free work: The battery packs are, of course, completely covered with Festool Service
- Dust extraction starts automatically: The Bluetooth version automatically starts the connected mobile dust extractor when the tool is switched on
- Bluetooth lithium-ion (Li-ion) battery pack with AIRSTREAM function for all Festool 18 V cordless tools (except CXS, TXS, ETSC 125, RTSC 400, DTSC 400)
- Bluetooth enables the CLEANTEC mobile dust extractor to be started automatically when the cordless tool is switched on (Bluetooth-compatible mobile dust extractor is required)
Specifications: | |
---|---|
Voltage | 18 V |
Capacity | 4.00 Ah |
Weight | 0.6 kg |
Festool 18V Li-Ion 5.2 Amph Airstream Battery (BP 18 Li 5.2 AS) 200181
Features:
- Innovative battery technology brings power and flexibility to your cordless tools with Festool's range of battery packs.
- Long lasting, and measurably superior to other cordless tools.
- Now you can achieve perfect results quickly and easily with the quality you expect, even when you’re not near an electrical outlet.
- Festool's Airstream Technology rapidly charges compatible batteries. Airstream technology significantly increases the battery capacity and provides faster charging.
- Cool air is directed through targeted air ducts in the battery and out through the charger to quickly lower the internal temperature.
- A minute display tells you exactly when the battery pack can be used again.
- This information is displayed both by the charge indicator on the charger and also by the integrated LED display on the battery pack itself.
Specifications: | |
---|---|
Voltage | 18V |
Amps | 5.2 Ah |
Festool Battery Charger 40min (TCL 6 AUS)
Features:
- For use with all lithium ion battery packs (except CxS/TxS), with AIRSTREAM function, replacement lithium-ion charger for 10.8 - 18 V battery packs in self-service display pack.
- The SCA 8 rapid charger with integrated cooling not only charges the new AIRSTREAM battery packs considerably faster, but also has a minute display telling you exactly when the battery pack can be used again.
- This information is displayed both by the charge indicator on the charger and also by the integrated LED display on the battery pack itself.
- Compatible Tools
- BHC 18 Cordless Hammer Drill
- C 18 Cordless Drill/Driver
- DRC 18 Cordless Drill/Driver
- FLC Uni LED Cordless Flashlight
- HKC 55 160mm Cordless Circular Saw
- KAL SYSLITE LED Work Light
- KAL SYSLITE II LED Work Light
- PDC 18 Cordless Hammer Drill
- PSBC 400 Cordless Jigsaw
- PSC 400 Cordless Jigsaw
- PSC 420 Jigsaw
- PSBC 420 Jigsaw
- SYSRock Worksite Radio
- T 18 Cordless Drill/Driver
Specifications: | |
---|---|
Quantity | 1 |
Package | In box |
Weight | 1,1 kg |
Charging Current | 8 A |
Input Voltage | 220 - 240 V |
Festool 18V VECTURO Starlock Brushless Oscillator Basic OSC 576591
Precise cutouts on the scribe mark, precisely guided plunge cuts on delicate surfaces and working with minimal dust generation, even above head height: This is what the cordless VECTURO OSC 18 stands for. Furthermore, the StarlockMax tool holder makes it possible to change tools quickly without the need for additional equipment, while the brushless EC-TEC motor with vibration isolation ensures that work can progress at an ultra-rapid pace at the same consistently high level of comfort. The interplay with the sophisticated positioning and extraction accessories makes the VECTURO an intelligent system solution for most demanding requirements on performance, comfort and precision.
Features:
- Quick-change system with StarlockMax tool holder - Set-up times are short since saw blades and accessories can be changed without the need for additional equipment. Maximum transmission of power to the saw blade.
- Anti-vibration system - Working is comfortable thanks to complete isolation of the motor and housing.
- Optimum working progress - Oscillation angle of 2°/2° (left/right) for quick and precise working.
- Huge versatility - Saw blades for use with wood, as well as universal and custom applications.
- Dust extraction device - For sawing with minimal dust and having a clear view of the workpiece. Ideal for sawing above head height.
- Positioning aid - For precisely guided plunge cuts. With integrated depth stop and extractor connector.
- Depth stop - For precisely defined plunge cuts - to protect the saw blade
- Powerful in use - EC-TEC motor with variable speed control for consistently fast working progress.
- Perfect ergonomics - Sleek housing with a rubberised grip to make working comfortable.
- EC-TEC Brushless Motor - The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
- Electronic Overload Protection - Protects the motor with blocking tool.
- Electronic Monitoring - Electronic monitoring of the coil temperature protects against damage to the motor.
- MMC Digital Electronics - Processor controlled "Multi Material Control" power electronics provide adjustable and constant speeds as well as temperature monitoring for work on all types of material.
- Quick Acting Brake - For safe work when planing, sawing and routing.
Specifications: | |
---|---|
Voltage | 18 V |
Motor Type | Brushless |
Oscillation | 10,000 - 19,500 rpm 2 x 2.0° |
Weight (with battery) | 1.8 kg |
Festool SYS 18V Energy Set 2 x 5.2Ah TCL6 Duo in Systainer 577077
The Festool Energy set is the ideal addition to the Festool Basic variants and also offers additional battery packs for the workshop and construction site.
Available with different equipment according to the individual main applications and energy requirements.
Always with sufficient space for a total of four battery packs – of which two can be charged at the same time using the TCL 6 DUO rapid charger.
Particularly practical: You no longer need to look for another socket for a second charger – making work easy and saving time on construction sites, in bodyshops and in vehicles. Of course everything cleanly packaged in the Systainer³ and fully covered by Festool Service.
Features:
- The perfect addition: The 5.2 Ah battery packs are powerful all-rounders for all applications and compatible with almost all Festool battery products. Especially suitable for all applications and 18 V devices – with a focus on power and endurance. (For example, endurance work with the Festool CTC MINI/MIDI, KSC 60, AGC 18, HKC 55, TSC 55 cordless extractors, as well as for especially heavy drilling and screwdriving applications with TPC 18/TDC 18)
- Dust extraction starts automatically: The Bluetooth® battery packs automatically start the connected mobile dust extractor when the tool is switched on
- With smart extensions: The Festool WorkApp enables clever additional functions in combination with the Bluetooth® function of the battery pack, such as the detailed display of the charging status and further operating data such as temperature or charging cycles. To quickly and easily identify the battery with the lowest charge status, you can flash the LED indicator directly on the battery pack. Software updates are also possible: Install the newest version to work with the latest tool functions at all times
- Charges two at the same time: The DUO rapid charger charges two battery packs at exactly the same time. This makes it suitable for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)
- Safely stored: Stowed in Systainer³ products with sufficient space for a total of four battery packs and the DUO rapid charger
- Mobile: Packed in a Systainer³, the Energy-Systainer can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site
- Better with a system: The Systainer³ is compatible with and can be attached to all previous Systainer generations, mobile dust extractors and many more system accessories
- Completely covered. Of course, the DUO rapid charger and all battery packs are also fully covered by Festool SERVICE
- As an ideal addition to the Basic variants or as additional battery packs for the workshop or construction site
Specifications: | |
---|---|
Voltage | 18 V |
Capacity | 5.2 ah |
Charging Current | 2x 6.0 A |
Input Voltage | 220 - 240 V |
Weight | 5.6 kg |
Festool 18V Li-Ion 5.2 Ah Airstream Bluetooth Battery Pack 202479
The new Bluetooth Battery Packs communicate with the Bluetooth module (sold separately) on the CT mobile dust extractors and ensures that even a cordless tool starts the mobile dust extractor automatically when switched on. This enables you to benefit from Festool's entire dust-free system when working with Festool cordless products too. Long lasting, and measurably superior to other cordless tools. Now you can achieve perfect results quickly and easily with the quality you expect, even when you’re not near an electrical outlet. Festool's Airstream Technology rapidly charges compatible batteries. Airstream technology significantly increases the battery capacity and provides faster charging. Cool air is directed through targeted air ducts in the battery and out through the charger to quickly lower the internal temperature. A minute display tells you exactly when the battery pack can be used again. This information is displayed both by the charge indicator on the charger and also by the integrated LED display on the battery pack itself.
Features:
- 36 Month Warranty - Did you know all Festool batteries and chargers come backed by a 36 month warranty under SERVICE all-inclusive? Giving you peace of mind that your cordless system will perform reliably.
- Unbeatable convenience - Just retrofit the Bluetooth module on the spare plug-in slot on the CLEANTEC mobile dust extractors (work to be done by qualified electrician) and operate the dust extractor easily by remote control or Bluetooth battery pack.
- Bluetooth battery packs - The combination of Bluetooth module and Festool Bluetooth battery pack now starts the dust extractor automatically even when working with cordless tools.
- Switch on from the hose - Switch on your dust extractor via the remote control right on the suction hose and save time by not having to go to the extractor. Ideal for cleaning between work steps.
Specifications: | |
---|---|
Voltage | 18 V |
Capacity | 5.2 ah |
Type | Lithium-ion |
Technology | Airstream & Bluetooth |
Weight | 0.7 kg |
Festool Guide Rail 1400mm FS 1400 2 491498
Made from anodized aluminium, Festool Guide rails are available in eight different lengths from (800 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Connect rails using Festool Guide Rail Connectors to make limitless cuts. Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time.
Features:
- Keeping it straight
Specifications: | |
---|---|
Length | 1400 mm |
Festool FS Guide Rail Joiner Set 577039
The two connecting pieces allow users to connect two guide rails so that they are straight and stable. The self-aligning function makes it quick and convenient to connect the guide rails. The connecting pieces are compatible with all Festool guide rails. They ensure precise cuts over the entire length of two or more connected guide rails.
Features:
- For long cuts. The connecting pieces allow users to make straight and precise cuts over the length of two or more connected guide rails.
- Simply connect and align - The self-aligning function makes it quick and convenient to connect two guide rails.
- High level of stability - The guide rails connected to the connecting pieces offer a high level of stability. For a connection that holds in any position.
- Clear marking - The laser engraving ensures that the two connecting pieces are used in the correct order Use the aligning connecting piece first, followed by the stabilising one.
Festool Guide Rail Bag FS BAG 466357
Protect your investment in Festool Guide Rails with the durable nylon carrying bag with shoulder straps. For convenient and protected transport or storage of up to two 1400 mm or shorter guide rails. Durable nylon construction protects your guide rails from scratches and dings. Guide rails sold separately.
Features:
- Guide Rail Tote Bag
Festool FS Guide Rail Adjustable Angle Stop 577040
The angle stop for the guide rail - for precise and fast angled cuts. Angles of -60° to +60° can be set with repeat accuracy and high precision. The angle stop, therefore, offers a wide range of applications and full flexibility. Thanks to the quick-clamping lever, the angle stop is attached to the guide rail in an instant.
Features:
- Precise panel cutting in any position - High-quality design for making precise angled cuts from -60° to +60° in combination with a guide rail and portable circular saw
- Easy to attach - Insert into the guide rail and move the quick-clamping lever. For accurately repeated angled cuts
- Secure grip - The option to attach fastening clamps and positioning bolts allows users to securely attach workpieces to the machine and to have a stable system.
- Easy locking - Specified locking positions can be used to set the most commonly used angles easily and with precision.
- Guide extension for cuts made to size - Adding another guide extension with a scale and an adjustable stop allows users to make cuts to size with repeat accuracy.
Festool 2Pk 120mm Adjustable Clamps FSZ 120 2 489570
Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom T-slot of Festool FS Guide Rails for limitless positioning. Clamping thickness 11/16 inches (120mm).
Features:
- Fastening Clamp, 120mm
Specifications: | |
---|---|
Clamping capacity | 120 mm |
Best of E-CUT Blade Starlock Set 35222967010
Accessory kit made up of 6 E-Cut blades for sawing in wood and metal.
Includes:
- 2 x E-Cut long-life saw blades 50 x 35 mm
- 2 x E-Cut long-life saw blades 50 x 65 mm
- E-Cut universal saw blade 55 x 28 mm
- E-Cut universal saw blade 55 x 44 mm
Includes:
SKU | F28728 |
Brand | Festool |
Shipping Weight | 30.0000kg |
Type | tools |
Voltage | 18 |
Be The First To Review This Product!
Help other tools.com users shop smarter by writing reviews for products you have purchased.