Makita 18V Brushless Hammer Driver Drill (Tool Only) DHP485

Features:

  • Brushless motor improves runtime and performance
  • 21 stage torque setting so you can adjust for the task at hand
  • 13 mm keyless chuck for easy but installation / removal by one hand
  • Twin LED job light for improved visibility in low light environments
  • Variable speed trigger for maximum control at your finger tip
  • 3 Settings - hammer setting for drilling in masonry or brick, screw setting and drill setting
  • Mechanical 2 speed gearing allows you to choose between maximum rpm or higher torque
  • Ergonomic design with slim rubber grip and lighter more compact chassis to reduce fatigue and improve control
  • Belt clip to easily hang your tool
  • XPT - eXtreme Protection Technology protects your tools against dust and moisture to ensure reliable service even when in tough jobsite conditions
Specifications:
Voltage18V
Chuck Size1.5 - 13 mm
Capacity - Steel13 mm
Capacity - Wood38 mm
Capacity - Masonry13 mm
Impacts per minute - High0 - 28,500 ipm
Impacts per minute - Low0 - 7,500 ipm
No Load Speed - High0 - 1,900 rpm
No Load Speed - Low0 - 500 rpm
Max Lock Torque50 Nm
Dimensions182 x 79 x 255 mm
Weight1.1 kg

Makita 18V Mobile Brushless Impact Driver DTD153Z

Features:

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute0-3,600 ipm
Max Fastening Torque170 Nm
Net Weight1.5 kg (BL1850B)
No Load Speed0-3,400 rpm
Overall Length126 mm
Capacity - Coarse Thread22-125 mm
Capacity - High Tensile BoltM5-M14
Capacity - Machine ScrewsM4-M8
Capacity - Standard BoltM5-M16

Makita 18V 115mm Cordless Grinder (tool only) DGA452Z

Features:

  • Anti-start function for safety
  • Battery replacement reminder
  • Electronic current limiter for overload protection
  • Warning lamp for overloading
  • Uses standard 115 mm discs
  • Slide-type on/off switch
  • Smaller circumference, housing and features soft grip for comfort and control
  • Replaceable carbon brushes
Specifications:
No Load Speed10,000 rpm
Wheel Size115 x 22 mm
Overall Length317 mm
Net Weight1.9 kg
Voltage18 V
Battery Accepted3.0, 4.0 & 5.0 AH

Makita 18V 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current, voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
  • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time
Specifications:
Voltage18V
Dimensions LxWxH11 x 8 x 6.5 cm
Weight0.63 Kg

Makita 18V 1 Hour Charger DC18SD

Features:

  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume
Specifications:
Cell Capacity1.5-6.0Ah
Charge Time30 mins (Compact)
60 mins (3.0 Ah)
Net Weight700 g
Overall Length151 mm
VoltageDC 7.2-18V

Includes:
DHP485Z Hammer Driver Drill,DTD153Z Impact Driver, DGA452 115mm Grinder,2 x 5.0Ah Battery,DC18SD Charger,
SKU DLX3283ST2
Model # DLX3283ST2
Brand Makita
Shipping Weight 5.5000kg
Voltage 18

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review