Milwaukee 18V Fuel ONE-KEY 3/4" High Torque Impact Wrench with Friction Ring M18ONEFHIWF34-0


  • Powerful - Complete replacement for pneumatic & corded impact wrenches, 1627 Nm Fastening Torque, 2034 Nm of nut-busting torque.
  • Productivity - Removes fasteners faster with a 4-mode Drive Control with bolt removal modem.
  • Compact - Provides greater access in tight spaces.
  • LED located at the foot of the tool for improved illumination of the work surface.
  • Premium alloy anvil material and updated design to handle increased torque.
  • Motor has high grade magnets, is 4 mm shorter and has a back cap design to save on length
Fastening Torque 1627 Nm
Nut Busting Torque 2034 Nm
RPM 0-1850 rpm
IPM 0-2400 ipm


Milwaukee 18V FUEL GEN 4 1/4" Hex Impact Driver M18FID30

The M18 FUEL™ 1/4" Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.


  • Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque
  • Provides the user the ability to deliver power to more demanding applications back-to-back
  • Enhanced motor delivers an improved 3,900 RPM when compared to previous generations
  • Provides the user with increased range of speed to complete application fast and with minimal downtime
  • Redesigned trigger mechanism with improved fitment and smoother acceleration
  • Tri-LED lighting illuminating the area of work while eliminating shadows
  • 4-Mode Drive Control provides users with greater control over the output speed and power
Voltage 18 V
Platform M18 Fuel
Chuck Type 1/4" Hex
Max Torque 226 Nm
RPM 0 - 1,700 / 3,000 / 3,900 / 3,900 rpm
IPM 0 - 1,400 / 3,600 / 4,400 / 4,400 ipm
Single Hand Bit Insertion Yes
Tri-LED Yes
Length 113.5 mm
Weight 1.0 kg


Milwaukee 18V 125mm (5") RAPID STOP Angle Grinder with Dead Man Paddle Switch M18FSAG125XPDB-0


  • Rapid Stop Brake - performs under 3 seconds stop time.
  • Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work.
  • Metal housing and gearing system providing legendary durability
  • Advanced ergonomics for increased mobility and productivity
  • REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge.
Voltage 18 V
Wheel Diameter 125 mm (5")
Spindle M14
RPM 9,000 rpm
Switch Type Dead Man Paddle Switch
Weight 2.4 kg


Milwaukee 18V 2-Speed Grease Gun M18GG-0


  • Dispenses grease in pre-set amounts
  • Bright LED flood Light provides illumination even in poorly lit areas
  • Independent On and Off button
  • Lock-Off or Lock-On Trigger uses Lock-Off to prevent inadvertent dispensing while Lock-On makes for less operator fatigue
  • 122cm, 48" Flexible Hose with Spring Guard makes it easier to access difficult to reach fittings
  • High-Pressure Coupler delivers better fitting retention and is rated up to 10,000 PSI
  • Plunger Rod with Grease Gauge has markings on the rod that show how much grease remains in the barrel
  • Powered by advanced technology Red Lithium Batteries
  • Fully compatible with Milwaukee 18V 2.0Ah, 3.0Ah and 4.0Ah batteries
Max flow rate (g/min) 283.5g/Min
2-Speed Gear Box Low speed (PSI) up to 10,000 PSI 99.2g/min
2-Speed Gear Box High speed (PSI) up to 5,000 PSI, 283.5g/min
Model (#) M18GG-0
Voltage (V) 18v
Operating pressure (PSI) 10,000psi
Speed (Gear) 2 Speed Gear Cartridge
Barrel capacity (g) 450g Cartridge
Flow rate )g/min) 284g/min
Hose length (cm) 122cm
Hose storage (Y/N) YES
Run time with 1.5Ah (g) Up to 10 cartridges (450g)
Pre-set grease counter (Y/N) YES
Weight tool only (kg) 3.49kg
Weight with Battery (kg) 4.32kg
Length (cm) 38.1cm
Warranty (years) 5 years


Milwaukee 18V High Output 6.0Ah Battery Pack M18HB6


  • Milwaukee introduces the High Output Extended capacity 6.0 Ah battery that provides 50% more power, running 50% cooler and delivering 20% more run time than the popular M18 Red-lithium Extended Capacity 5.0 Ah Battery.
  • The High Output 6.0Ah battery is on par with the M18B9 9.0Ah battery as far as Output and price are concerned.
Voltage 18V
Amp Hours 6.0 Ah
Weight 1.28 kg


Milwaukee Rapid Charge Station M12-18FC


  • Charges all Milwaukee batteries up to 40% faster.
  • Charges all M12 and M18 batteries.
  • Sequential charging.
  • REDLINK intelligence communicates directly with the battery.
  • REDLINK monitors cell voltage and temperature.
  • REDLINK charges to optimise the performance, protect and extend the life of the battery.
Voltage 12V & 18V
Weight (tool only) 0.77 kg
Supplied in Carton
Warranty 2 year
Barcode # 4892210220158
Brand Milwaukee
Shipping Weight 16.7000kg
Shipping Width 0.618m
Shipping Height 0.340m
Shipping Length 0.185m
Shipping Cubic 0.038872200m3
Type tools
Voltage 18
Amp Hours 6.0
Package Quantity 4 Piece
Battery Technology Lithium-Ion
Motor Type Brushless
Power Source Cordless
Battery Included 2x6.0Ah
Warranty 5 Year Skin and 2 Year Battery & Charger

Be The First To Review This Product!

Help other users shop smarter by writing reviews for products you have purchased.

Write a product review