Dust shroud for corners for 125mm wheels will fit most 125mm angle grinders and 180mm polishers, steel fabrication with hybrid floating skirt.

  • This dust shroud for corners is designed with two edging faces – at the front and at the side.
  • Fabricated from steel it will not warp or wear prematurely and is rigid in shape to allow for the hybrid floating skirt which automatically adjusts to the right height when you place the grinder on the floor or you can order the rubber and hook skirt.
  • Frictionless in operation without suck-down it is easy to control and will not drain your energy quickly which will increase your productivity.
  • Seven inserts are provided for the mounting collar to fit all the major brands of 125 mm angle grinders and many of the 180 mm variable-speed polishers.
  • A removable cover strip is fixed to the front and side of this dust shroud for corners with hook and loop fastening for quick, tool-less removal when grinding against a wall.
  • The plastic and rubber skirts will eventually wear through in small areas by the grinding wheel while edging so that debris may escape when grinding the main floor away from the wall. This will be prevented by replacing the cover strip after edge grinding is completed .
  • Under most conditions this dust shroud will fully contain the dust when fitted to an adequate vacuum dust collector.
  • For best performance do not mount the grinding wheel too high or have more than 2 mm gap between the top rim of the steel shroud and the underside of the grinding wheel.
  • The dust outlet tube is 38 mm OD and 35 mm ID which is standard for many vacuum fittings and 35 mm vacuum hoses, and adapters can be purchased from vacuum dust collector suppliers to reduce 50 mm vacuum hoses to the 38 mm shroud fitting.
Tube ID35 mm
Tube OD38 mm
Brand Concrete Grinder Sales
Shipping Weight 0.7000kg

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review