Makita 18v Li-ion Brushless Hammer Drill DHP481

Features:

  • Single sleeve keyless chuck
  • Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications
  • Mode ring selection
  • Mechanical 2 speed gearing
  • Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving
  • All metal gear construction
  • Twin LED job light with after-glow function
  • Battery fuel gauge shows power remaining in battery
  • Single sleeve keyless chuck allows for easy bit installation. Removal by one hand
  • High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation
  • Extreme Protection Technology with enhanced dust and drip resistant performance
Specifications:
Impacts Per Minute - Hi 0-31,500ipm
Impacts Per Minute - Lo 0-8,250ipm
Max Fastening Torque - Hard 115Nm
Max Fastening Torque - Soft 60Nm
Net Weight 2.7kg
No Load Speed - Hi 0-2,100rpm
No Load Speed - Lo 0-550rpm
Overall Length 205mm
Capacity - Masonry 16 mm
Capacity - Steel 13mm
Capacity - Wood 76mm
Voltage 18V

 

Makita DTD154 18v Brushless Impact Driver

 

Features:

  • 4 Modes for various applications
  • Max fastening torque: 175Nm
  • BLDC motor (Brushless DC motor)- Maintenance-free due to no brush- Energy production is more efficient than brushed DC motor
Specifications:
Voltage 18V
Max output 240W
Driving shank 6.35 mm (1/4) Hex
Capacities Machine screw M4 - M8
Standard bolt M5 - M16
High tensile bolt M5 - M14
Coarse thread screw 22 - 125 mm
Impacts per min. Hi: 0 - 3,800 ipm
Med: ,2,600 ipm
Lo: 1,100 ipm
No load speed Hi: 0 - 3,600 rpm
Med: 2,100 rpm
Lo: 1,100 rpm
Max. fastening torque 175Nm
Electric brake Yes
Variable speed control by trigger Yes
Reverse switch Yes
LED job light Yes
Weight 1.3kg
Dimensions (LxWxH) 129x79x236mm

 

Makita 18v 125 mm Li-ion Brushless Angle Grinder GA504Z

 

Features:

  • Easy to hold grip design with rubber for anti-skid
  • Worlds deepest concrete cutting mobile angle grinder at a depth of 20 mm
  • Excellent performance - as powerful as AC model
  • Gear housing can be rotated to suit most cutting and grinding applications
  • Automatic speed control changes the cutting speed according to load condition for an optimum operation
  • Removable dust cover
  • Anti-restart function prevents accidental start-up for safety even if the machine is plugged to power source with the lock-on switch on
  • Extreme protection technology for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
Specifications:
Voltage: 18V
Wheel diameter: 125 mm
No load speed: 8,500rpm
Dimensions (L x W x H): 362mm x 140mm x 145mm
Weight: 2.1kg

 

18V Mobile Brushless Rotary Hammer - DHR242Z

 

Features:

  • Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
  • One touch slide chuck for SDS-plus bit
  • Easy-to-grip handle
  • Ergonomically designed to give maximum power thrust
  • Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
  • 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
  • The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
  • Higher productivity than model DHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
Specifications:
Battery Type Lithium-Ion
Battery Quantity (3.0 Ah) 0
Voltage 18 v
Single Impact Energy 2.4 J
Blows per minute 0 - 4700 bpm
No Load Speed 0 - 950 rpm
Net weight 3.3 kg
Capacity in Concrete 24 mm
in Steel - 13 mm
in Wood - 27 mm

 

Makita 18V Blower - Short Nozzle DUB185Z

 

Features:

  • Lightweight design weighing only 2.1 kg with a battery the blower can comfortably be used for extended periods of time
  • Short blower nozzle with curved end for comfortable cleaning of footpaths, driveways and hard surfaces
  • Optional vacuum attachment - improved switch allows the user to easily select between high, medium and low speed settings
  • 3 Stage speed selector along with the variable speed trigger, there is also a 3 stage speed selector allowing you to dial in the blowing power to match the application
  • Optimum grip to frame angle provides optimum nozzle to ground angle for efficient sweeping operation
< strong >Specifications:
Voltage 18 V
Max. air volume 3.2m³/min
Max. air velocity 352 km/h
Blowing force 3.1 N
No load speed 0-18,000 rpm
Length 517 mm
Weight 1.5 kg

Includes:
Hammer Drill - DHP481,Impact Driver - DTD154, Angle Grinder - DGA504Z,Rotary Hammer - DHR242Z, Blower - DUB185Z, 2x 5.0Ah Batteries,Charger,Carry Bag
SKU DLX5035T
Barcode # 088381851176
Brand Makita
Shipping Weight 15.0000kg
Shipping Width 0.038m
Shipping Height 0.035m
Shipping Length 0.057m
Type tools
Voltage 18

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review