Bonus Via Redemption until 30 September 2022 - Makita 18V Brushless Sub-Compact Recipro Saw DJR188Z OR Makita 18V Brushless 1/3 Sheet Finishing Sander DBO381Z
For redemption go to https://www.makita.com.au/promotions

Makita 18V Brushless Heavy Duty Hammer Driver Drill DHP486Z

Features:

  • Compact Design for improved handling and control the overall length has been reduced by 27 mm vs. the previous model
  • 3 Drilling Modes - screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141 Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16 mm hole diameter.
  • LED Joblight - high brightness twin LED joblight with pre glow and after glow functions. Illuminating the working area for greater visibility during application
  • High Power Output - This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy duty applications.
  • 2 Speed Mechanical Gearing - high speed mode produces 2,100 rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
  • All metal gear construction - allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
  • XPT Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability.
Specifications:
Voltage 18 V
Max. drilling capacities in wood Auger bit: 50 mm
Self-feeding bit: 76 mm
Hole saw: 152 mm
Max. drilling capacities in steel 13 mm
Max. drilling capacities in masonry 16 mm
No load speed Hi: 0 - 2,100 rpm
Lo: 0 - 550 rpm
Impact rate Hi: 0 - 31,500 ipm
Lo: 0 - 8,250 ipm
Max. peak torque 141 Nm
Max. tightening torque Hard: 130 Nm
Soft: 65 Nm
Length 178 mm
Weight 2.1 kg
Makita 18V Brushless Impact Driver DTD154Z

Features:

  • Brushless motor for more power and longer runtimes
  • Aluminium hammer case
  • One touch bit installation
  • Electronic 3 stage impact selection
  • T:mode for self drilling screws
  • Variable speed control by trigger
  • Ergonomically designed handle
Specifications:
Impact Rate 1st 0-3,800 ipm
2nd 0-2,600 ipm
3rd 0-1,100 ipm
Max Fastening Torque 175Nm
Net Weight 1.5 kg w/BL1830
No Load Speed 1st 0-3,600 rpm
2nd 0-2,100 rpm
3rd 0-1,100 rpm
Overall Length 117 mm
Capacity Coarse Thread 22-125 mm
High Tensile Bolt M5-M14
Machine Screws M4-M8
Standard Bolt M5-M16
Makita 18V 125mm Brushless Angle Grinder With Slide Switch DGA504Z

Features:

  • Easy to hold grip design with rubber for anti-skid
  • Worlds deepest concrete cutting mobile angle grinder at a depth of 20 mm
  • Excellent performance - as powerful as AC model
  • Gear housing can be rotated to suit most cutting and grinding applications
  • Automatic speed control changes the cutting speed according to load condition for an optimum operation
  • Removable dust cover
  • Anti-restart function prevents accidental start-up for safety even if the machine is plugged to power source with the lock-on switch on
  • Extreme protection technology for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
Specifications:
Voltage 18V
Wheel diameter 125 mm
No load speed 8,500 rpm
Dimensions (L x W x H) 362 x 140 x 145 mm
Weight 2.1 kg
Makita 18V Brushless 165mm Circular Saw DHS680Z

Features:

  • High power cutting ability
  • Automatic Speed Control
  • Compact - lightweight design
  • Optional dust nozzle
  • Tool Hanger
  • Ergonomically designed handle
  • Twin LED job light
  • Large lock-off lever
  • Blower Function
Specifications:
Max cutting capacity at 0 degrees : 57mm
at 45 degrees : 41mm
at 50 degrees : 37mm
Blade diameter: 165mm
No load speed (rpm): 5,000
Makita 18V 24mm Brushless Rotary Hammer Drill DHR242Z

Features:

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure, comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering, Hammering only and Rotation only
  • Tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent, delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact
Specifications:
Manufacturer Makita
Model No DHR242Z
Battery (Type) Lithium-Ion
Charging Time (min) 22
Battery Quantity (3.0 Ah) 0
Voltage (V) 18
Single Impact Energy (J) 2.4
Blows per minute (BPM) 0 - 4700
No Load Speed (RPM) 0 - 950
Net weight ( kg) 3.3
Capacity in Concrete (mm) 24
Capacity in Steel (mm) 13
Capacity in Wood (mm) 27
Makita DX06 Dust Extraction Set - suits DHR242 199566-6

Features:

  • Impact filter cleaning mechanism - Turn the dial to impact the filter case releasing the dust from the filter.
  • HEPA filtration system - Captures 99.97% of concrete dust particulates 0.3 microns and larger
  • 2 Stage Dust Extraction Nozzle - Stage 1 drill bits 110 mm to 165 mm / Stage 2 drill bits 210 mm to 265 mm
  • Adjustable depth stop - with 5 mm increments
  • DX Extractors - Powered by a separate motor allowing the rotary hammer to maintain peak drilling performance
Specifications:
Depth Gauge 5 mm increments
Suits DHR242
Dimensions 400 x 100 x 300 mm
Weight 1.74 kg
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current, voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
  • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg
Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2

Features:

  • Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V
DHP486Z Hammer Driver Drill , DTD154Z Impact Driver, DGA504Z Angle Grinder, DHS680Z Circular Saw, DHR242Z Rotary Hammer, DX06 Dust Extraction Set , 2x 5.0ah Batteries, Fast Charger DC18RC, Carry Case
SKU DLX5062TX1
Barcode # 088381734189
Brand Makita
Shipping Weight 16.8500kg
Shipping Width 0.350m
Shipping Height 0.380m
Shipping Length 0.570m

Be The First To Review This Product!

Help other tools.com users shop smarter by writing reviews for products you have purchased.

Write a product review