Makita 18V 600ml Sausage Caulking Gun DCG180ZB

Features:

• Light, compact design
• 360° rotating sealant holder - This design feature enables the operator to efficiently caulk in those hard to reach places by simply rotating the sealant holder so that the angle of the cartridge nozzle covers the gap in need of caulk
• Variable speed control via dial and trigger switch for optimum control of sealant flow rate: 1) Speed control dial - Enables the user to set pushing speed for perfect sealant flow rate to match the material of the workpiece or the width of the gap to in need of caulk. 2) Variable speed trigger switch - This feature allows for fine adjustment of the pushing speed for a controlled sealant flow rate from the start point and around the corner
• LED job light complete with handy pre-glow and afterglow functions
• Overload Indication Lamp; single LED light notifies user of potential overload to avoid breakage of the sealant cartridge as follows: Blinking - The device is nearing overload Solid - The device is overloaded; the overload circuit will disable power
• Rubberised soft grip handle offers user-friendly comfort and ease of control
• Anti-drip Function eliminates excess sealant from oozing out upon release of the trigger by lessening the residual pressure inside of sealant cartridge holder
• Piston for bulk sealant can additionally be used as a suction plunger to pump sealant into the 600ml size holder from the bulk container (DCG180ZB only)

Makita 18V Multi Tool DTM50Z

Features:

• On tool hex wrench for accessory changes
• Compatible with a wide range of accessories
• 6,000 - 20,000opm no load speed for versatile performance
• 12 angle settings of accessories at every 30° from 0° to 360°
• Anti-restart function

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

• Star Protection
• Battery Fuel Gauge
• Multi-contact slide type terminal
• Protective gel coating
• Active 3 Controls current, voltage and thermal temperature
• Shock absorbing construction
• The fastest charge times in the industry
• Intelligent battery & charger communication system
• Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
• Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
• Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
• Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
• Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
• Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
• Up 66% more run time than BL1830*
• 4-Stage battery fuel indicator
• 45 minute charge time

Makita 18V 1 Hour Charger DC18SD

Features:

• Digital power display indicates charging level
• More cost effective option
• Optimum charging system to maximise cycle life and work volume