The Image used is a guide only and may differ from actual product appearance.
"AT 1000" is the perfect solution to the problems created by the contamination of the compressed air used in many plasma cutting systems. It eliminates "sputter" caused by moisture and oil from compressed air lines. It extends the electrode and tip life, with obvious benefits to the cut quality. Designed to remove aerosol oil and moisture, the "AT 1000" is a real benefit, entrapping particles as small as .01 microns inches, with the "AT 1000" torches Iasts longer. Using a plasma cutter without the "AT 1000" fitted will result in condensed moisture remaining in the torch and torch head. This moisture can cause a short-circuit, with subsequent costs for the replacement of the torch head. The "AT 1000" can filter up to 1250 Iitres a minute without reduction in pressure. It's RECOMMENDED to replace the filter cartridge every 5 to 7 days (max). It's also very suitable for painters and use of pneumatic tools.
- Sub-Micronic Air Filter Option
|Filtering Degree||01 pinch - 0.25 pm|
|Maximum Pressure||125 PSI - 8.5 bar|
|Maximum Flow @ 80%||2700 SCFH - 1250 |/min|
|Temperature Range||1 5-1 40F / -1 0 +60C|
|Size Pipe||1/4 NPT|
|Dimension||132 x 200 mm|