Makita 18v Auto Feed Screw Gun DFR450ZX
Features:
- Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
- Increased rotational speed - 4,000 rpm ensuring smooth screw driving
- Tool-less stopper base adjustment
- New silent clutch - features high durability with direct drive transmission in reverse rotation
- Reversing switch - carriage can be removed/installed without tool for bit replacement
- Rigid aluminium casing
Specifications: | |
---|---|
Voltage | 18V |
Capacity(Collated Drywall Screw) | 4 mm x 25-40 mm |
Max Output | 235W |
No Load Speed | 4000 rpm |
Length | 424 mm |
Weight | 2.3 kg |
Makita Cross Line Laser SK105DZ
Features:
- 1 Horizontal and 1 vertical lines - laser projects 1 horizontal line and 1 vertical line a intersecting at 90 degrees
- Red laser provides bright laser beam projection visible at a distance of up to 20 metres
- XPT - for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
- 2 mode brightness settings - laser can be emitted in 2 different brightness settings, Eco and High brightness
- 3 mode line selection - line beam can be emitted in 3 modes, horizontal only / vertical only and horizontal and vertical crossline
- CXT - powered by 12V Max batteries the laser has an extended continuous runtime of up to 84 hours on maximum power with a 4.0 Ah battery and 32 hours with a 1.5 Ah
- DC jack - allows power to be supplied from 18V batteries using USB adaptor ADP05 and power supply cable
Specifications: | |
---|---|
Voltage | 12 V Max |
Diameter of laser point | 2.0 mm |
Range | 20 mm |
Self levelling range | ±4° |
Measuring tolerance | ±3 mm at 10 m |
Continuous runtime | 4.0 Ah = 40 hrs 2.0 Ah = 20 hrs 1.5 Ah = 15 hrs |
Overall length | 138 mm |
Weight (with 4.0 Ah Battery) | 0.85 kg |
Makita 18v Mobile Impact Driver DTD152Z
Features:
- extreme Protection Technology (xPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- NEW Battery Protection System provides Over-Discharge, Temperature and Circuit Protection for enhanced performance, battery cycle life and overall battery life
- Increased max. torque of 1,460 in. lbs.
- One-touch bit holder enables quick and easy bit installation
- Twin LED lights with pre-glow and after-glow functions
- Glow in the dark rubber bumper
- Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
Specifications: | |
---|---|
Battery Capacities | 18V Li-Ion |
Hex Shank | 1/4 Hex |
No Load Speed | 0 - 2,900 RPM |
Impacts Per Minute | 0 - 3,500 IPM |
Maximum Fastening Torque | 1,460 in. lbs (165 Nm) |
Vibration Level | 10.5 m/s² |
Noise Level | 93 dB(A) |
Overall Length | 5-3/8" (137 mm) |
Net Weight | 2.0 lbs (0.9 kg) |
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L
Features:
- Star Protection
- Battery Fuel Gauge
- Multi-contact slide type terminal
- Protective gel coating
- Active 3 Controls current, voltage and thermal temperature
- Shock absorbing construction
- The fastest charge times in the industry
- Intelligent battery & charger communication system
- Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
- Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
- Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
- Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
- Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
- Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
- Up 66% more run time than BL1830*
- 4-Stage battery fuel indicator
- 45 minute charge time
Specifications: | |
---|---|
Voltage | 18V |
Dimensions LxWxH | 11 x 8 x 6.5 cm |
Weight | 0.63 Kg |
Makita 12V Max 1.5Ah Battery BL1016-L
Features:
- New 12 V Max platform, featuring the newly developed slide Li-ion battery
- Compact eXtreme Technology
- Compact and lightweight range of tools
- Industry leading charge technology
Specifications: | |
---|---|
ID | BL1016 |
12 V Max | 1.5 Ah |
Fuel Gauge | NO |
Makita DC18RE Li-Ion Dual Voltage Rapid Charger 198453-6
Features:
- Designed to be compatible with both the 12V MAX CXT and 18V LXT battery platforms
- Making it ideal for users who want to enjoy the benefits of both platforms
- Forced air system - the built in fan cools the battery during the charging process to facilitate faster charging and longer battery life
- Rapid charge - selects the optimum voltage, current and temperature for reduced charge time
- Compact design - designed around the single port charger an additional charging port has been added with the overall length only 12 mm longer
- Dual voltage compatible - sequentially charges 18V LXT and 12V MAX CXT batteries based on the first battery placed in the charger
- Optimum charging system - maximises charge time and battery life, monitoring current, voltage and temperature for faster and more efficient charging
- Digital charging display - shows you the status of your battery or if the battery is faulty
Specifications: | |
---|---|
Voltage | 18V and 12V MAX |
Cell capacity | 1.5Ah-6.0Ah |
Charging ports | 2 (sequential charging) |
Overall length | 164 mm |
Net weight | 1.2 kg |
Includes:
SKU | DK0103X1 |
Barcode # | 88381878975 |
Brand | Makita |
Shipping Weight | 5.0000kg |
Assembled Length | 0.295m |
Assembled Height | 0.315m |
Assembled Width | 0.395m |
Type | tools |
Voltage | 18 |
Battery Technology | Lithium-Ion |
Package Quantity | 3 Piece |
Warranty | 5 Year Skin and 2 Year Battery & Charger |
Be The First To Review This Product!
Help other tools.com users shop smarter by writing reviews for products you have purchased.